TC Ditto Mic Looper – Review

TC Electronic Ditto Mic Review– based on Question/Answer format so you can skip around to what you care about. Feel free to post questions or answers below the review.


Compare new and used pricing from Reverb.com, Amazon.com, and Guitar Center: 

Reverb Pricing (new and used):
Check Price on GuitarCenter.com - LooperMusic.com


TC Ditto Mic

TC Ditto Mic

Looper Category: Type 1 (category definitions)

Target Setup: beat boxing and practice

Competitive Position: Although TC created the compact (micro) category with the Ditto, they were second to market with this vocal looper device (the DigiTech JamMan Vocal XT was first). For the Ditto Mic looper, the price fits right in on the low end of the compact category. A few interesting features of this loop pedal are (1) it has both XLR in and out, so that it fits between your mic and your PA (2) it has an automatic setting for the gain (3) certain microphones can be used to control the looping function (TC-Helicon MP-75 or Sennheiser e835 FX) and (4) TC added an extra footswitch for a single-tap stop.

The closest competitor is the JamMan Vocal XT. Here is a quick comparison:

  • Price (today): Vocal XT $100, Ditto Mic $93
  • Loop time: Vocal XT 10 minutes, Ditto Mic 5 minutes
  • Warranty: Vocal XT 6 years, Ditto Mic 3 years
  • Sample fidelity: Vocal XT 46.8 kHz/24-bit, Ditto Mic 44.1kHz/24-bit
  • Mic input gain setting: Vocal XT screw-driver adjust, Ditto Mic auto-set
  • XLR Phantom power: Vocal XT 48V, Ditto Mic 24V
  • Vocal XT unique selling points:
    • JamSync to sync with other XT loopers and create a multi-track looping setup
    • Stereo sound
  • Ditto Mic unique selling points:
    • USB to import and export wav files
    • True Bypass
    • Microphone control

Warranty: The TC Ditto Mic has a standard 1 year warranty through TC. However, if registered online within 90 days it increases to 3 years. See details.

  • What is the price I should expect to pay for the TC Electronic Ditto Mic and how does that compare to other loopers?
    • Please see our price tracker that we update regularly for a historical view on pricing, along with new vs used.

Check the current price on the TC Ditto Mic Looper (will open in separate tab)

 

  • What is the main function of the TC Ditto Mic?
    • The only function of the TC Ditto Mic is looping, specifically with a microphone.

 

  • How long can I record with the TC Electronic DITTO MIC?
    • The TC DITTO MIC can record 5 minutes. They did not improve that over the TC Ditto Ditto Stereo or the X2, unfortunately.

 

  • How many memory locations (slots) are included in the TC Electronic Ditto Mic?
    • There is only one memory slot. This is another area where they didn’t improve over the original Ditto, Ditto Stereo or the X2.

 

  • Using the Ditto Mic, can I learn by having an instructor play something and then slow it down to work on matching the notes?
    • No, while this was available on the X2, they took it out for the Stereo and Ditto Mic.

 

  • Can I practice soloing with the X2?
    • Yes, this is really one of the main uses of the Ditto Mic. It is designed for a guitar or bass player to create their own rhythm and then solo over it.

 

  • Can I use the TC Electronic DITTO MIC to capture quick song ideas to review later?
    • The Ditto Mic only has one memory slot, so it’s not the ideal solution for composition.

 

  • Can I switch to a different loop/slot while performing with the TC Electronic DITTO MIC?
    • No, there is only one loop/slot to work with on the DITTO MIC.

 

  • Can I perform loop-to-loop queuing with the TC Electronic DITTO MIC?
    • No, there is only one loop/slot to work with on the DITTO MIC.

 

  • Can I switch back to the previous loop while performing with the TC Electronic DITTO MIC?
    • No, there is only one loop/slot to work with on the DITTO MIC.

 

  • With the TC Electronic DITTO MIC, can I record and play different parts of a song (verse, chorus, bridge) all during a live performance while not using my hands (pedals and footswitches only)?
    • No, there is only one loop/slot on the DITTO MIC.

 

  • Can I go from recording directly into overdub with the TC Electronic DITTO MIC?
    • No, unlike the Ditto’s with battery options (X2 and Stereo), the Mic does not have a battery compartment and therefore does not have the dipswitch needed to change the default flow of record/play/overdub.

 

  • Can I undo/redo the last overdub to change the song or eliminate a recording error with the TC Electronic DITTO MIC?
    • With the TC DITTO MIC, you are able to undo the last overdub and also redo the last undo.

 

  • Can I set previous layers to go quieter or fade out while overdubbing new layers with the TC Electronic DITTO MIC?
    • No, this is considered an advanced function that is only available on more expensive and complicated loop pedals.

 

  • Can I adjust the volume or effects of individual overdubs with the Ditto Mic?
    • No, there is only one volume knob on the TC DITTO MIC and it controls the level of loop volume.

 

  • Can I record individual overdubs/layers as individual WAV files with the TC Electronic DITTO MIC to then work with in a DAW?
    • With the TC DITTO MIC, we are not aware of any method for individually recording overdubs/layers.

 

  • Can I use the 1/8” MP3/CD input to play song into the looper and incorporate it into my loop with the TC Electronic DITTO MIC?
    • There is no 1/8” aux input on the TC Ditto Mic.

 

  • Can I pre-record tracks, edit them in a DAW, load them into the TC DITTO MIC as loops and then trigger them with the footswitch when needed?
    • Yes, you can but only with one track at a time.

 

  • Can I trigger a one-shot playback (a.k.a. single phrase) with the TC Electronic DITTO MIC? In other words, can I set the loop to only play one time when triggered?
    • No there is no one-shot playback feature on the DITTO MIC.

 

  • Can I play multiple loops simultaneously with the TC Electronic DITTO MIC, and turn them on and off? For example, play drums on one track, base-line on the other, and guitar on another and bring them in and out of the song?
    • The only way you could partially accomplish this with the TC DITTO MIC is with the undo redo functionality, and it would be very limited.

 

  • Can I play a loop or overdub in reverse with the TC Electronic DITTO MIC?
    • No, the TC Ditto Mic does not have reverse. They added it for the X2, but removed it for the Stereo and Mic.

 

  • Does the TC Electronic DITTO MIC have stereo sound or just mono?
    • The TC DITTO MIC has mono sound.

 

  • Is there anything in the TC Electronic DITTO MIC that reduces the clicking sound that can occur when tapping the footswitch during overdub?
    • Yes, you can use the mic control instead of the footswitch, if you purchase the correct mics (see above).

 

  • Is the TC Electronic DITTO MIC a good looper for live performances on stage?
    • In my opinion no. I think that live performance should include multi-track loopers.

 

  • Are there multiple stop modes in the TC Electronic DITTO MIC?
    • No, there is only one stop mode for the DITTO MIC – immediate.

 

  • Can I stutter start with the TC Electronic DITTO MIC?
    • No, there is no known way to accomplish stutter start with a DITTO MIC.

 

  • Can I resample with the TC Electronic DITTO MIC? In other words, can I take a loop and modify it by multiplying it, cutting part of it out, adding a different effect to it, etc?
    • We are not aware of any resampling or multiply functionality with the TC DITTO MIC.

 

  • Can the TC Electronic DITTO MIC be set to auto-record when I begin playing?
    • No the TC DITTO MIC does not have auto-record.

 

  • With the TC Electronic DITTO MIC, are there any issues with droning (playing the same note, chord, repeated sounds, or tone-clusters continuously) at the boundaries of the loops – such as noticeable change in volume?
    • We have not experienced or heard of an issue with droning using the TC DITTO MIC.

 

  • Does the TC Electronic DITTO MIC have a built in metronome?
    • There is no built-in metronome for the TC DITTO MIC.

 

  • Is there any software that comes with the TC Electronic DITTO MIC?
    • No, there is no software package that comes along with the DITTO MIC.

 

  • Is quantize functionality available on the TC Electronic DITTO MIC?
    • No, there is no quantize function on the DITTO MIC.

 

  • Will the TC Electronic DITTO MIC interface with my DAW (digital audio workstation)/computer through USB?
    • The TC DITTO MIC does not function as an audio interface. The USB is only used to update the firmware.

 

  • Will the TC Electronic DITTO MIC interface with my computer through USB to transfer sound files?
    • Yes, this was improved over the original Ditto for the X2, Stereo, and Mic.

 

  • Can I save and recall loops with SD card with the TC Electronic DITTO MIC?
    • The current loop you are recording is saved through power down and is still saved when the unit is powered up. However, there is no removable card and there is only one memory slot.

 

  • Does the TC Electronic DITTO MIC have effects (FX)?
    • No the TC DITTO MIC does not have built-in effects (FX).

 

  • Can I bypass the effects (FX) with the TC Electronic DITTO MIC?
    • No, this is not applicable to the TC DITTO MIC because the unit does not have internal effects.

 

  • Can I turn off or mute the live signal that is fed through the TC Electronic DITTO MIC (for use in parallel effects loops of an amp or in Aux Send/Return of a mixer)?
    • No, but the Ditto Mic has “True Bypass”. It will automatically go into this mode where the AC/DC/AC is completely by-passed when you are not looping so that the DITTO MIC can be part of an effects chain. It’s different, but somewhat related.

 

  • Can I save presets for effects with the TC Electronic DITTO MIC?
    • No, this is not applicable to the TC DITTO MIC because the unit does not have internal effects.

 

  • Does the TC Electronic DITTO MIC have an XLR mic input? Does it have phantom power for a condenser microphone?
    • Yes and yes.

 

  • Does the TC Electronic DITTO MIC function as a mixer with multiple inputs?
    • No, the Ditto Mic does not function as a mixer.

 

  • Can I re-assign footswitch functionality with the TC Electronic DITTO MIC?
    • No, the two footswitches are not re-assignable.

 

  • Does the TC Electronic DITTO MIC have a headphone jack for playback and monitoring?
    • No the TC DITTO MIC does not have a dedicated 1/8” jack for headphones.

 

  • Can the TC Electronic DITTO MIC be connected to an external MIDI device?
    • No the TC DITTO MIC does not have MIDI ports.

 

  • Does TC Electronic release firmware updates for the TC DITTO MIC?
    • Yes they do.

 

  • Is there an optional footswitch that I can add to the TC Electronic DITTO MIC to increase functionality?
    • No, there is no added or off-loaded functionality that can be added with an external footswitch for the DITTO MIC.

 

  • Is there an optional expressional pedal that I can add to the TC Electronic DITTO MIC to control effects(FX)?
    • No, there is not a way to connect an expression pedal to the TC DITTO MIC.

 

  • What is the sampling rate and bit depth of the A/D/A conversion?
    • For the TC DITTO MIC, the A/D/A conversion is specified as 24-bit, 44.1 kHz.

 

  • Can the TC Electronic DITTO MIC be battery powered?
    • No, there is no battery option on the Ditto Mic.

 

  • What size is the TC Electronic DITTO MIC?
    • At 5.31” x 4.44” x 2.13, the TC Ditto Mic is a little larger than the Ditto Stereo.

 

  • Why is using a TC Electronic DITTO MIC better than just using computer software? Or why should I use a stompbox looper instead of something that is software based?
    • Ease of use – when you have a looper pedal setup, you just sit down and play (just like picking up an instrument). This makes spontaneous fifteen minute jam sessions happen all the time.
    • Control and reliability – especially during a live performance. Has your PC ever frozen or started running slow all of a sudden? There are a lot of processes that can occur in a computer that are unrelated to your music, and you may not have control over all of them.
    • Ability to interface hands-free with a dedicated stompbox/pedal/footswitch
    • The software usually has a much steeper learning curve. Nothing puts me out of the music-playing mood faster than trying to figure out how to work with the recording software and getting stuck on something.
    • If you managed to setup a reliable, hands-free computer based system then it’s still difficult to go on stage and have the performance feel “live”. People are used to seeing pedals on stage, but once you bring out your laptop then it starts feeling like a DJ performance. Nothing wrong with that, for some.
    • Latency: PC and Mac based looper set-ups cannot match the latency of the loop pedals. This results in more timing misalignment between layers and can degrade the quality of the performance. Latency describes the delays that occur at each stage as the sound travels – therefore, if there is delay between when you make a sound and when it’s recorded, as well as a delay between when the playback is generated and when you actually hear it, then you get the timing issues.
    • Analog pass through: several of the loop pedals have true analog pass through, so that you can reduce A/D and D/A delays in your signal path.

 

  • Why is using a TC Electronic DITTO MIC better than just using an iPhone or iPad application?
    • There is very limited functionality with the iOS based loopers compared to the TC Electronic DITTO MIC. However, these apps are quickly improving. With added hardware (microphone, Bluetooth control pedal, etc.), these setups may start to look attractive. Please see our iOS app setup information.
    • With regards to live performances, bringing an iPad or iPhone on stage may feel more like a DJ performance, but it’s not going as far as bringing a laptop. Also, the OS may be more predictable and stable compared to an entire computer or workstation. Therefore, we think that iOS based loopers will be more stage-friendly than laptops, but not as stage-friendly as pedals/stompboxes in the foreseeable future.

 

  • What company makes the DITTO MIC and where are they located?
    • TC Electronic is located in Risskov, Denmark. The company was founded in 1976.

 

  • How is the support from TC on any issues that arise with the unit?
    • Typically TC has been known for strong customer support. I do think they had a little issue with scaling as the success of the Ditto series was extreme. There were some complaints in online forums about not getting timely help.

 

  • How long has the TC Electronic DITTO MIC been in production?
    • The TC Ditto Mic was announced in January 2015. This followed the TC Ditto X2, which was announced the year earlier. It preceded the Ditto Stereo, which was announced in the spring of ’15.

Disclaimer: We are not affiliated with any manufacturer, but we do offer affiliate links to purchase most of the equipment we discuss at 3rd party sites (such as Amazon.com). If you choose to purchase through these links, we receive a small commission, but the price stays the same for you.

About

Feel free to drop me a note to say hi or ask any question, whether you’re just getting started with looping or have been at it for years. The best way to reach out is via the LooperMusic Facebook page, at https://www.facebook.com/LooperMusic.

Otherwise please visit the “Read before you buy” page via the menu.

Posted in Equipment, Looper Pedals, Product Reviews Tagged with: , , , ,